GRAPHTEC FC8600-160 64" (162.6 cm) Wide Cutter - New + Tint Tek 20/20 Window Film Cutting Software V10 Monthly Subscription

GRAPHTEC FC8600-160 64" (162.6 cm) Wide Cutter - New + Tint Tek 20/20 Window Film Cutting Software V10 Monthly Subscription

  • $7,140.99
  • Guardar $155


               The FC8600 series high performance cutting plotter is an industry leader for sign makers, graphic artists, automotive aftermarket professionals, countertop installers and other related users. Maximum cutting speed of 58.5 in/sec 4.0G Maximum Acceleration Up to 600g cutting force! Effective cutting of: diamond grade, high-intensity reflective film, prismatic grade reflective sheeting, sandblast resist rubber, automotive window & paint protection films, self-adhesive vinyl, Amberlith™ and Rubylith™, among other media types. The FC8600 Series Has Added Features 3 inch wide user-friendly LCD control Panel, a Dual configuration function (two-user set and save customized conditions), included Ethernet capability (run multiple machines from one location), and an option for additional push rollers with 3 tension settings and the new 5th Generation ARMS system (automatically detects registration marks with color variants).

Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
CPU 32-bit CPU
Configuration Grit rolling type
Drive method Digital servo drive
Max. cutting area (W x L) (*1)

2 ft x 164 ft

610 mm x 50 m

2 ft 6 in x 164 ft

762 mm x 50 m

3 ft 6 in x 164 ft

1067 mm x 50 m

4 ft 6 in x 164 ft

1372 mm x 50 m

5 ft 4 in x 164 ft

1626 mm x 50 m

Cutting area of guaranteed accuracy (*2) 23.23 in x 50 ft 29.21 in x 50 ft

41 in x 32 ft,

35.2 in x 50 ft

53 in x 32 ft,

35.2 in x 50 ft

63 in x 32 ft,

35.2 in x 50 ft

Mountable media width

Min. 1.97 in
Max. 30.31 in

Min. 1.97 in
Max. 36.22 in

Min. 1.97 in
Max. 48.19 in

Min. 1.97 in
Max. 60.20 in

Min. 1.97 in
Max. 72.83 in

Max. cross cut width 2 ft 4.9 in (734 mm) 2 ft 10 in (886 mm) 3 ft 10.88 in (1191 mm) 4 ft 10.9 in (1496 mm) 5 ft 8.9 in (1750 mm)
Number of push rollers 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers
Max. cutting speed 4 ft 10.46 in/s (1485 mm/s) at 45° direction
Axial acceleration Max. 39.2 m/s2 (4 G) in 8 steps
Cutting force Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution 0.005 mm
Programmable resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2) Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size Approx. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types Supersteel (0.9 mm or 1.5 mm diameter)
Pen types Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Light pointer Built into the tool carriage
Cross-cutter Built into the tool carriage
Perforation cutting Supported (performed by force control)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2 MB
Command sets GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Display Graphic type LCD (3-inch, backlight)
Power source 100 V to 240 V AC, 50 / 60 Hz
Power consumption Max. 160 VA
Operating environment 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)

Approx. 44" x 28" x 48"

(1120 x 711 x 1219 mm)

Approx. 50" x 28" x 48"

(1270 x 711 x 1219 mm)

Approx. 61.8" x 28" x 48"

(1570 x 715 x 1219 mm)

Approx. 73.6" x 28" x 48"

(1870 x 711 x 1219 mm)

Approx. 84" x 28" x 48"

(2130 x 711 x 1219 mm)

Weight Approx. 38 kgs / 106 lbs
including stand
Approx. 52 kgs / 115 lbs
including stand
Approx. 60 kgs / 133 lbs
including stand
Approx. 68 kgs / 150 lbs
including stand
Approx. 73 kgs / 161 lbs
including stand
Included software (*4) Windows driver, Plotter controller, Graphtec Pro Studio (*5),
Cutting Master 4, Graphtec Studio for Mac
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7
Mac OS 10.7 to 10.12
Compatible Standards UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A
Model FC8600-60 FC8600-75 FC8600-100

FC8600-130

FC8600-160
CPU 32-bit CPU
Configuration Grit rolling type
Drive method Digital servo drive
Max. cutting area (W x L) (*1)

2 ft x 164 ft

610 mm x 50 m

2 ft 6 in x 164 ft

762 mm x 50 m

3 ft 6 in x 164 ft

1067 mm x 50 m

4 ft 6 in x 164 ft

1372 mm x 50 m

5 ft 4 in x 164 ft

1626 mm x 50 m

Cutting area of guaranteed accuracy (*2) 23.23 in x 50 ft 29.21 in x 50 ft

41 in x 32 ft,

35.2 in x 50 ft

53 in x 32 ft,

35.2 in x 50 ft

63 in x 32 ft,

35.2 in x 50 ft

Mountable media width

Min. 1.97 in
Max. 30.31 in

Min. 1.97 in
Max. 36.22 in

Min. 1.97 in
Max. 48.19 in

Min. 1.97 in
Max. 60.20 in

Min. 1.97 in
Max. 72.83 in

Max. cross cut width 2 ft 4.9 in (734 mm) 2 ft 10 in (886 mm) 3 ft 10.88 in (1191 mm) 4 ft 10.9 in (1496 mm) 5 ft 8.9 in (1750 mm)
Number of push rollers 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers
Max. cutting speed 4 ft 10.46 in/s (1485 mm/s) at 45° direction
Axial acceleration Max. 39.2 m/s2 (4 G) in 8 steps
Cutting force Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution 0.005 mm
Programmable resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2) Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size Approx. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types Supersteel (0.9 mm or 1.5 mm diameter)
Pen types Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Light pointer Built into the tool carriage
Cross-cutter Built into the tool carriage
Perforation cutting Supported (performed by force control)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2 MB
Command sets GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Display Graphic type LCD (3-inch, backlight)
Power source 100 V to 240 V AC, 50 / 60 Hz
Power consumption Max. 160 VA
Operating environment 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)

Approx. 44" x 28" x 48"

(1120 x 711 x 1219 mm)

Approx. 50" x 28" x 48"

(1270 x 711 x 1219 mm)

Approx. 61.8" x 28" x 48"

(1570 x 715 x 1219 mm)

Approx. 73.6" x 28" x 48"

(1870 x 711 x 1219 mm)

Approx. 84" x 28" x 48"

(2130 x 711 x 1219 mm)

Weight Approx. 38 kgs / 106 lbs
including stand
Approx. 52 kgs / 115 lbs
including stand
Approx. 60 kgs / 133 lbs
including stand
Approx. 68 kgs / 150 lbs
including stand
Approx. 73 kgs / 161 lbs
including stand
Included software (*4) Windows driver, Plotter controller, Graphtec Pro Studio (*5),
Cutting Master 4, Graphtec Studio for Mac
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7
Mac OS 10.7 to 10.12
Compatible Standards UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A

 

Tint Tek 20/20 Window Film Cutting Software - Downloadable - Version 10 (Monthly Subscription)

NOTE: The $245 price shown above represents an initial setup fee plus the the 1st month's subscription fee of 139.95.Monthly subscription plan is $139.95 thereafter.

Tint Tek is a subscription based version of this popular window tint template and cutting software. This is a great cost-effective solution for a smaller tint shop, with low up-front fees.

Activating Your Product

After your order is processed, you will receive an e-mail with a download link and activation code.
You will also be shipped 1 Clipart CD, 1 (Roland Compatible) Tint Blade.

Our new generation software, the optimum choice for tint shops, car dealerships, car detailing shops... that want superior performance offers even more features to help expand your business and create more revenue streams. With your Tint Tek window film cutting software, you will have the industries largest, most comprehensive, current database of automotive window film templates. You will also have the option to design custom logos, graphics and signage for the automotive, commercial and residential markets using window film or vinyl.

 

As a Tint Tek user your “New Generation” software program provides many superior benefits including.

  • Over 10,000 templates dating back to the 70s, with current updates added continuously
  • No trimming necessary
  • Cut the entire vehicle in 2 minutes or less.
  • Tint Tek software allows users to work without having to access the internet for each tint job.
  • Improves profits by greatly reducing costs due to waste and errors.
  • Increases productivity, even for established tint shops with experienced personnel
  • “Tint Tek” Next Generation” software powered by Flexi, includes support for importing clip art, more flexible nesting options, the ability to resize and rotate templates with hundreds of plotters drivers for most all plotters .
  • Proffessional fitting, flawless microedge finish cuts each and every time.
  • Eliminating special skills training, decreasing the time and level of employee training.

Your Tint Tek software includes our exclusive Remote Access Tracking System (RATS). Remote Access Tracking System gives you the ability to track each and every vehicle cut from the software in house or remotely. Imagine being away from your shop é office and having the ability of knowing what was cut at any given day or hour without being there.

 

COMMERCIAL/RESIDENTIAL FLATGLASS

Your Tint Tek software includes our flat glass cutting system. This enables you to cut rectangles and squares for all flat glass film applications for homes and businesses. Create unique decorative designs with custom logos and imported graphics. This flat glass cutting software makes cutting security film a breeze.

 

 

VINYL GRAPHICS

Tint Tek software also gives you the tools to create full color custom logos, commercial signs, murals and vehicle graphics.

 

 

MORE TEMPLATES

Tint Tek software V10 software also includes a large database of paint protection templates as well as full windshield templates.

 

 

SYSTEM REQUIREMENTS:

Computer

  • Windows XP, Vista, 7, 8, 8.1
  • Pentium III or higher 512MB or greater
  • 200MB install space
  • 4 Gig Hard Disk
  • 1024x768 resolution monitor
  • 16 bit color
  • 4x CD-ROM Drive
  • Available port for each output device
  • Internet Connection
  • Window Film Plotter/Cutter

Cutter

All popular brands

Automotive Film

Tint Tek works with all types of quality grade film and vinyl.

Software Policy

Each software bought comes with one year of service. Once that year is up, the customer must renew in order to keep existing patterns and maintain new ones. With the software the customer receives, they are able to do Tint, Windshield, Paint Protection, and Sign Making.


También recomendamos